3D Printer Machine Oem/Odm Manufacturer In Shenzhen
You are here: Home > 3D Printer Filament
Products

3D Printer Filament

CREALITY3D PLA FILAMENT

Item No.: 201804090402
Buy creality 3D supplies/filament.material  at best prices with several kinds of colors. more energy consumption, more resistant, even more environmental-friendly. it can last for about 3 months once it is opened. if not open,expire period:1 year
INQUIRY
Description Specification
Parameter:
 Material PLA ABS
Dimension 25.5CM*12CM*23CM 220-250℃
Density 1.25±0.05g/gm³ 1.04±0.2g/gm³
Melt flow rate 5-7g/min
(190℃ 2.16kg)
2-4g/min
(190℃ 2.16kg)
Water absorption 0.5% 1%
Tensile Strength ≥60MPa ≥43MPa
Flexural modulus ≥60MPa ≥60MPa
Elongation at break ≥3.0% ≥3.0%
 Diameter 3mm/1.75mm 3mm/1.75mm
Bubble 100% no bubbles 100% no bubbles
N.W 1kg(length:340m) 1kg(length:340m)
Coil Size Diameter: 200 high:66
Coil hole dilameter 56
Diameter: 200 high:66
Coil hole dilameter 56
Temperature PLA (no need to heat the heated bed) 80-120℃

Difference between ST-PLA and normal PLA:
Material Advantage Disadvantage
ST-PLA
  1. Including all the advantages of PLA
  2. With good tenacity(even at temp. of -10)
  3. The impact resistance of printing model is 3 times than normal PLAPrint shell thickness has a good anti-drop effect)
  4. After opening, it can regularly be preserved within 3-6 months and doesnt have any bad print effect.
  5. Anti-aging (the print out can saved more longer)
High cost
PLA
  1. Good compatibility and degradability of pla,Good compatibility and degradability of pla, non-toxic and environmentally friendly, strong stability.
  2. With low melt strength, good tensile strength and ductility, more easy to build up the models, and the surface if smooth with colorful design.
  3. Suitable for all kinds of FDM 3D printer, printing artwork and molding.
  4. Cost-effective
  1. Pla glass has a relatively high glass temperature and is brittle under normal temperature conditions.
  2. Poor anti-aging ability,Strong water absorption
  3. Print model requirements are thicker, no anti-drop.
  4. Need to be sealed after use

Review